Mortar Retailers Rutland VT

Local resource for mortar retailers in Rutland, VT. Includes detailed information on local businesses that give access to brick retailers, mortar retailers, contractors, as well as information on masonry tools and content on mortar.

The Home Depot
(802)786-6900
299 US Rt 4 East
Rutland, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Goodro True Value Of Killington
(802) 422-3469
Rt 4
Killington, VT
 
Gilmore Home Center
(802) 468-5676
Route 4 A
Bomoseen, VT
 
E.c.crosby&sons A True Value Store
(802) 293-5111
49 Mill Rd
Danby, VT
 
NeighborWorks of Western Vermont
(802) 438-2303
110 Marble Street
West Rutland, VT
 
Noble Ace
(802) 773-2758
261 N Main St
Rutland, VT
 
Nail It Down Hardware
(802) 446-2133
34 Maple Street
Wallingford, VT
 
Brandon Lumber & Millwork
(802) 247-6000
11 Grove St
Brandon, VT
 
The Hardware At Rochester
(802) 767-4200
Rt 100 Main Street
Rochester, VT
 
Sheds and Barns Built On Site
(802) 349-0684
2039 route 144
benson, VT
Services Offered
Custom built sheds constructed on your property

The Mortar Guide (Types M,N,S, O)

You're ready to start on your masonry project. You're ready to tackle that wall, patio, or fancy barbecue you've planned on, and you have decided on the material you want to use; be it brick, stone, or concrete block. But, before you do, it's time for a little mortar education, as you want to use the best bonding material possible to keep your project well intact.
 
  Mortar is a cement mixture used to bond bricks and stones etc. together. Mortar is comprised of cement, lime, and sand, and by adding water. Mortar is classified into four main types, each type having different amounts of the added sand and lime. Different mortar types are used depending on the purpose of the structure being built. Some structures need more holding power than others due to pressure and load factors. Flexibility of the mortar is also a factor in the bonding process due to expansion and contraction related to temperature and weather changes, soil conditions, and acts of nature.
 
  Mortar can be mixed three ways: from scratch using separate bags of Portland cement, hydrated lime, and sand; from masonry cement (Portland cement premixed with lime) and sand; and from bags containing all three ingredients in the proper proportions for the strength and type needed. The last type is generally the easiest type to use in home improvement projects. Premixed mortar comes in types M, N, S, and O.
 
  Type M is the strongest type of mortar. It has the highest compression strength. Type M is used for walls bearing heavy loads, such as retaining walls and foundations, and is also used with stone as the strength of the mortar mimics that of the stone being used. Type M mortar is used mostly for commercial construction projects and home building. Type M is is comprised of 1 part cement, 1/4 part lime, and 3 3/4 parts sand.
 
  Type S is a strong mortar used by home owners which has medium-high compression strength, and tensile strength, giving it more flexibility. It is good for walls, retaining walls, foundations and patios where soil pressure, as well as earthquakes are an issue. Type S contains 1 part cement, 1/2 part lime and 4 1/2 parts sand. It's strength is about 75% of type M.
 
 Type N is a medium strength mortar. Type N is most often used by home owners. It is a good choice for  projects with bricks and blocks that are not load bearing, as well as for garden walls, chimneys, and barbecues. Type N has 1 part cement, 1 part lime, and 6 parts sand. It has about 33% the strength of type M mortar.
 
  Type O mortar is used for interior work only, for non-load bearing use. It has a low compressive strength and is used on indoor projects where weather, soil, and pressure are not a factor. Type O is made up of 1 part cement, 2 parts lime, and 9 parts sand, giving it about 14% the strength of type M.
 
  There you have it for some mortar education. Remember to follow the dir...

Click here to read the rest of this article from Remodeleze.com