Flagstone Walling Marshalltown IA

This page provides relevant content and local businesses that can help with your search for information on Flagstone Walling. You will find informative articles about Flagstone Walling, including "Project: Flagstone Wall". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Marshalltown, IA that can help answer your questions about Flagstone Walling.

Kmart 7583 / Cross Merch
(641) 753-0945
1720 S Center St
Marshalltown, IA
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Spahn & Rose Lumber Co.
(641) 752-1541
110 W Madison
Marshalltown, IA
 
True Value Hardware
(641) 486-2268
Center & Union
Union, IA
 
True Value Hardware
(800) 642-7392
Center & Union
Union, IA

Data Provided By:
Hartzell Wood Stock
(563) 566-2298
111 Center Street P.O. Box 176
Lime Springs, IA

Data Provided By:
Fastenal- Marshalltown
641-752-9674
1309 Industrial Blvd Suite B Marshalltown, IA, 50158
Marshalltown, IA
 
Marshalltown -Auth Hometown
(641) 752-8888
507 Iowa Ave W
Marshalltown, IA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17

Spahn & Rose Lumber Co.
(641) 484-3060
207 State St.
Tama, IA
 
Wilkerson Hardware
(800) 642-7392
129 E High St
Toledo, IA

Data Provided By:
Hill Hardwood Supply, Inc.
(319) 351-6640
3564 Dolphin Drive SE
Iowa City, IA

Data Provided By:
Data Provided By:

Project: Flagstone Wall

If you have an existing wall on your property, such as a retaining wall, that is constructed with simple concrete or concrete blocks, give it a distinguished make-over with a veneer of flagstones. Your plain wall will then be an alluring focal point as well as serving it's structural purpose.
 
  You will first need to clean the wall. Scrape any powdery build-up with a wire brush when the wall is dry. If the wall has any oil stains, apply a commercial concrete cleaner and scrub the spots with a stiff brush. Also scrape off any peeling paint. After those blemishes have been removed, clean the entire wall with either a concrete cleaner or strong detergent and water. Let the wall completely dry.
 
  Measure the wall to get an idea of the amount of flagstones you will need. Choose flagstones that are the lightest and thinnest that you can find, and predominantly flat on one side. Stones that are more squared off will lend a more geometric appearance, where irregularly shaped stones will give a more natural look. Choose the style that best fits your home's architecture. Then follow these steps to complete the project.
 
  1. Lay down a piece of plywood that is equal in width to the height of the wall. If it is a tall wall the plywood will represent a portion of the wall. Lay the flagstones on the plywood, flattest side down, and arrange them in an integrated design where they will best fit together, and require minimal trimming and cutting.
 
  2. Paint a coat of latex bonding agent on the wall. Then mix a batch of mortar following the instructions on the bag. Apply a 3/8 inch thick layer of mortar to the wall using a straight trowel. If the back of the stones are not that flat, apply a slightly thicker amount.
 
  3. Starting at the bottom of the wall, press the flagstones into the mortar. At least three-quarters of the flagstone should be embedded in the mortar. Use wood shims to hold the flagstones in place and to provide consistent spacing. Continue on up to the top of the wall. Make any adjustments before the mortar starts to harden.
 
  4. After placing the flagstones and the mortar has almost hardened, remove the wood shims. When the mortar has completely hardened it's time to mortar the joints, or the spaces between the flagstones. With either a pointed trowel or a mortar bag (where you squeeze the mortar out), apply the mortar into the joints. Wipe the ed...

Click here to read the rest of this article from Remodeleze.com