Flagstone Walling Los Lunas NM

This page provides relevant content and local businesses that can help with your search for information on Flagstone Walling. You will find informative articles about Flagstone Walling, including "Project: Flagstone Wall". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Los Lunas, NM that can help answer your questions about Flagstone Walling.

The Home Depot
(505)865-0425
1800 Main Street NW
Los Lunas, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

RAKS Building Supply
(505) 865-1100
108 Carson Drive
Los Lunas, NM
 
Belen - Auth Hometown
(505) 861-2345
19554 Highway 314
Belen, NM
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17

Fastenal- Albuquerque
505-294-2389
7201 Broadway Blvd SE Suite B Albuquerque, NM, 87105
Albuquerque, NM
 
The Great E Scape
(505) 797-3860
9123 Blue Meadow Trl SW
Albuquerque, NM
 
Lowe's
(505) 807-3172
3048 Main Street Nw
Los Lunas, NM
 
Hacienda Home Ctr Do it Best
(505) 869-2637
1255 Bosque Farms Blvd
Bosque Farms, NM
 
RAKS Building Supply
(505) 865-1100
205 Rio Bravo Blvd Sw
Albuquerque, NM
 
Kmart 4400 / Cross Merch
(505) 831-1200
4208 Central Ave Sw
Albuquerque, NM
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

The Home Depot
(505)771-3523
7700 US 550 NE
Rio Rancho, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Project: Flagstone Wall

If you have an existing wall on your property, such as a retaining wall, that is constructed with simple concrete or concrete blocks, give it a distinguished make-over with a veneer of flagstones. Your plain wall will then be an alluring focal point as well as serving it's structural purpose.
 
  You will first need to clean the wall. Scrape any powdery build-up with a wire brush when the wall is dry. If the wall has any oil stains, apply a commercial concrete cleaner and scrub the spots with a stiff brush. Also scrape off any peeling paint. After those blemishes have been removed, clean the entire wall with either a concrete cleaner or strong detergent and water. Let the wall completely dry.
 
  Measure the wall to get an idea of the amount of flagstones you will need. Choose flagstones that are the lightest and thinnest that you can find, and predominantly flat on one side. Stones that are more squared off will lend a more geometric appearance, where irregularly shaped stones will give a more natural look. Choose the style that best fits your home's architecture. Then follow these steps to complete the project.
 
  1. Lay down a piece of plywood that is equal in width to the height of the wall. If it is a tall wall the plywood will represent a portion of the wall. Lay the flagstones on the plywood, flattest side down, and arrange them in an integrated design where they will best fit together, and require minimal trimming and cutting.
 
  2. Paint a coat of latex bonding agent on the wall. Then mix a batch of mortar following the instructions on the bag. Apply a 3/8 inch thick layer of mortar to the wall using a straight trowel. If the back of the stones are not that flat, apply a slightly thicker amount.
 
  3. Starting at the bottom of the wall, press the flagstones into the mortar. At least three-quarters of the flagstone should be embedded in the mortar. Use wood shims to hold the flagstones in place and to provide consistent spacing. Continue on up to the top of the wall. Make any adjustments before the mortar starts to harden.
 
  4. After placing the flagstones and the mortar has almost hardened, remove the wood shims. When the mortar has completely hardened it's time to mortar the joints, or the spaces between the flagstones. With either a pointed trowel or a mortar bag (where you squeeze the mortar out), apply the mortar into the joints. Wipe the ed...

Click here to read the rest of this article from Remodeleze.com