Flagstone Walling Clarksdale MS

This page provides relevant content and local businesses that can help with your search for information on Flagstone Walling. You will find informative articles about Flagstone Walling, including "Project: Flagstone Wall". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Clarksdale, MS that can help answer your questions about Flagstone Walling.

Commerce Plz S/C
(662) 624-8311
937 Commerce Plz
Clarksdale, MS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:11-16
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:11-16

Hyde Brothers True Value Hardware.
(800) 642-7392
861 S State St
Clarksdale, MS

Data Provided By:
The Home Depot
(662)234-7863
201 Home Depot Dr
Oxford, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(228)867-9925
15220 Creosote Rd
Gulfport, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(228)354-8872
1680 Elizabeth Blvd
Biloxi, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Ferretti Bldg Mtrls Inc
(662) 398-5166
800 Beale St
Shelby, MS
 
The Home Depot
(601)825-1427
200 Orleans Way
Brandon, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Newman Lumber Company
(228) 832-1899
P.O. Box 2580
Gulfport, MS

Data Provided By:
The Home Depot
(601)856-4660
211 Colony Way
Madison, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(601)952-0740
6325 I-55 North
Jackson, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided By:

Project: Flagstone Wall

If you have an existing wall on your property, such as a retaining wall, that is constructed with simple concrete or concrete blocks, give it a distinguished make-over with a veneer of flagstones. Your plain wall will then be an alluring focal point as well as serving it's structural purpose.
 
  You will first need to clean the wall. Scrape any powdery build-up with a wire brush when the wall is dry. If the wall has any oil stains, apply a commercial concrete cleaner and scrub the spots with a stiff brush. Also scrape off any peeling paint. After those blemishes have been removed, clean the entire wall with either a concrete cleaner or strong detergent and water. Let the wall completely dry.
 
  Measure the wall to get an idea of the amount of flagstones you will need. Choose flagstones that are the lightest and thinnest that you can find, and predominantly flat on one side. Stones that are more squared off will lend a more geometric appearance, where irregularly shaped stones will give a more natural look. Choose the style that best fits your home's architecture. Then follow these steps to complete the project.
 
  1. Lay down a piece of plywood that is equal in width to the height of the wall. If it is a tall wall the plywood will represent a portion of the wall. Lay the flagstones on the plywood, flattest side down, and arrange them in an integrated design where they will best fit together, and require minimal trimming and cutting.
 
  2. Paint a coat of latex bonding agent on the wall. Then mix a batch of mortar following the instructions on the bag. Apply a 3/8 inch thick layer of mortar to the wall using a straight trowel. If the back of the stones are not that flat, apply a slightly thicker amount.
 
  3. Starting at the bottom of the wall, press the flagstones into the mortar. At least three-quarters of the flagstone should be embedded in the mortar. Use wood shims to hold the flagstones in place and to provide consistent spacing. Continue on up to the top of the wall. Make any adjustments before the mortar starts to harden.
 
  4. After placing the flagstones and the mortar has almost hardened, remove the wood shims. When the mortar has completely hardened it's time to mortar the joints, or the spaces between the flagstones. With either a pointed trowel or a mortar bag (where you squeeze the mortar out), apply the mortar into the joints. Wipe the ed...

Click here to read the rest of this article from Remodeleze.com